PRODUCT HIGHLIGHTS
- Machine Compatibility: Backhoe loaders, hydraulic excavators, and grapple trucks.
- Tine Thickness & Spread: 2.0 inch thick steel tines with 14.5 inch spacing.
- Track Lift: Up to 8 inches.
- Rotation Options: 270° electro-hydraulic rotation or no rotation for fitting tiltrotator couplers.
- Motor Type: Single vibrator motor with heavy-duty output shaft.
- Vibration: High-frequency design for fast, consistent tamping.
- Squeeze Power: 10 tons of force.
APPLICATIONS
- Spot tamping along mainline, siding, and yard track
- Turnout tamping
- Ballast tightening around ties after undercutting
- Crib compaction
- Branch line maintenance
KEY FEATURES
- Raises track up to 8 inches: Engineered to push ballast upward.
- Powerful Dymax Rail vibrator group: Delivers optimal frequency with fewer motor issues.
- 2″ T1 steel tines with AR500 pads: Tough, wear-resistant, and fully replaceable with weld-on pads for long service life.
- Heavy-duty rubber isolators: Extend component life and reduce vibration transfer to the machine.
- Single-cylinder design with protected stops and integrated flow control: Smooth, consistent operation.
- Rotation options: Optional 270° rotation system or can be made to fit tiltrotator coupler systems.
- Bolt-on Top Adapter: For fitting backhoe loaders, excavators, or specialized single-pin connections used on railroad cranes and grapple trucks.
- Electro-hydraulic control kit: Smooth, precise operation for rotation-equipped models.
- Transport stand with tie-down points: Simplifies handling and storage.
Not the right fit for your operation? Find the tamper that is. View all DymaxRail Ballast Tamper models →
OPTIONS
TWIN-TAMPER CONFIGURATIONS FOR SWITCH & CROSSING
- Machine Compatibility: Designed for hi-railed excavators mounted directly over the railroad tracks, 15-ton and larger.
- Tamping Workheads: Dual Series 14 tampers spaced to meet standard gauge requirements.
- Lift & Stow: Independent hydraulic lift for each workhead provides maximum clearance in tight rail areas such as switches and crossings.
CUSTOM HYDRAULIC KITS (For Machines with Single Auxiliary Circuits)
- Overview: Includes a multi-sectional valve assembly mounted directly to the tamper for seamless operation and reduced machine setup time.
- Compatibility: Engineered for backhoe loaders and excavators equipped with a single auxiliary hydraulic circuit.
- Function: Provides electronic directional control to operate both the rotation and squeeze functions of the tamping tines.
- Customization: Each kit is tailored to the specific configuration of the machine’s existing hydraulic circuits to ensure optimum performance and ease of installation.
FAQ
CAN A TAMPER ATTACHMENT REPLACE A DEDICATED TAMPING MACHINE?
The Series 14 is built for the work a production tamper doesn’t reach: spot maintenance, turnout work, crib compaction after undercutting, and jobs where mobilization cost doesn’t pencil out. For scheduled mainline surfacing, a dedicated tamper is still the right call. Most MOW crews run both.
WHAT MACHINES DOES THE SERIES 14 FIT?
The Series 14 mounts to backhoe loaders — including Cat 420 and 430, and Case 580 and 590 series — hydraulic excavators from 8 to 20 tons, and grapple trucks with single-pin crane-style connections. It’s available with a bolt-on adapter for tiltrotator coupler systems, and a custom hydraulic kit is available for machines with only a single auxiliary circuit.
WHAT IS A TWIN-TAMPER CONFIGURATION, AND WHEN WOULD I USE ONE?
The Series 14 twin-tamper mounts two workheads to a beam, spaced to standard gauge. It’s designed for hi-railed excavators (15-ton and larger) working directly over the track in switch and crossing applications, where a single workhead would require constant repositioning. Each workhead has an independent hydraulic lift so it can be stowed when clearance is tight. If your crew is doing volume switch tamping, the twin configuration cuts the number of machine moves significantly.
SPECIFICATIONS
SINGLE TAMPER MODELS WITH 270° ROTATION
| Model Code Description Weight (lbs) |
| DX-BT-DYM14-270×1-GT-10
Ballast Tamper-DymaxRail Series 14-270 degree rotation x 1 motor-Grapple Truck-Class 10 This tamper is for Cranes or Grapple Truck applications that feature single pin mounting. STANDARD FEATURES: – 14.5 inch tine spacing – 270 degree rotation system – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – DymaxRail heavy duty vibrator group – Single cylinder; center mount – Integrated flow control for motor circuit – Bolted 4 bolt head plate for fitting truck/crane applications (does not include single pin mount) – 12v Electro hydraulic valve mounted on workhead; provided with cable kit – Transport stand with tie downs included WEIGHT: Tamper: 1550 lbs / Stand: 300 lbs / Total Weight: 1850 lbs |
| DX-BT-DYM14-270×1-BL-10
Ballast Tamper-DymaxRail Series 14-270 degree rotation x 1 motor-Backhoe Loader-Class 10 STANDARD FEATURES: – 14.5 inch tine spacing – 270 degree rotation system – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – DymaxRail heavy duty vibrator group – Single cylinder; center mount – Integrated flow control for motor circuit – Machine adapter with pins setup with Bolt 202 head plate – 12v Electro hydraulic valve mounted on workhead; provided with cable kit – Transport stand with tie downs included WEIGHT: Tamper: 1800 lbs / Stand: 300 lbs / Total Weight: 2100 lbs |
| DX-BT-DYM14-270×1-BL-20
Ballast Tamper-DymaxRail Series 14-270 degree rotation x 1 motor-Backhoe Loader-Class 20 STANDARD FEATURES: – 14.5 inch tine spacing – 270 degree rotation system – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – DymaxRail heavy duty vibrator group – Single cylinder; center mount – Integrated flow control for motor circuit – Machine adapter with pins setup with Bolt 202 head plate – 12v Electro hydraulic valve mounted on workhead; provided with cable kit – Transport stand with tie downs included WEIGHT: Tamper: 1800 lbs / Stand: 300 lbs / Total Weight: 2100 |
| DX-BT-DYM14-270×1-HX-8T
Ballast Tamper-DymaxRail Series 14-270 degree rotation x 1 motor-Hydraulic Excavator-8 Ton STANDARD FEATURES: – 14.5 inch tine spacing – 270 degree rotation system – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – DymaxRail heavy duty vibrator group – Single cylinder; center mount – Integrated flow control for motor circuit – Machine adapter with pins setup with Bolt 202 head plate – 12v Electro hydraulic valve mounted on workhead; provided with cable kit – Transport stand with tie downs included WEIGHT: Tamper: 1800 lbs / Stand: 300 lbs / Total Weight: 2100 |
| DX-BT-DYM14-270×1-HX-12T
Ballast Tamper-DymaxRail Series 14-270 degree rotation x 1 motor-Hydraulic Excavator-12 Ton STANDARD FEATURES: – 14.5 inch tine spacing – 270 degree rotation system – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – DymaxRail heavy duty vibrator group – Single cylinder; center mount – Integrated flow control for motor circuit – Machine adapter with pins setup with Bolt 202 head plate – 24v Electro hydraulic valve mounted on workhead; provided with cable kit – Transport stand with tie downs included WEIGHT: Tamper: 1900 lbs / Stand: 300 lbs / Total Weight: 2200 lbs |
| DX-BT-DYM14-270×1-HX-16T
Ballast Tamper-DymaxRail Series 14-270 degree rotation x 1 motor-Hydraulic Excavator-16 Ton STANDARD FEATURES: – 14.5 inch tine spacing – 270 degree rotation system – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – DymaxRail heavy duty vibrator group – Single cylinder; center mount – Integrated flow control for motor circuit – Machine adapter with pins setup with Bolt 303 head plate – 24v Electro hydraulic valve mounted on workhead; provided with cable kit – Transport stand with tie downs included WEIGHT: Tamper: 1900 lbs / Stand: 300 lbs / Total Weight: 2200 lbs |
| DX-BT-DYM14-270×1-HX-20T
Ballast Tamper-DymaxRail Series 14-270 degree rotation x 1 motor-Hydraulic Excavator-20 Ton STANDARD FEATURES: – 14.5 inch tine spacing – 270 degree rotation system – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – DymaxRail heavy duty vibrator group – Single cylinder; center mount – Integrated flow control for motor circuit – Machine adapter with pins setup with Bolt 303 head plate – 24v Electro hydraulic valve mounted on workhead; provided with cable kit – Transport stand with tie downs included WEIGHT: Tamper: 2000 lbs / Stand: 300 lbs / Total Weight: 2300 lbs |
Design and specifications are subject to change without notice.
SINGLE TAMPER MODELS WITHOUT ROTATION (FITS TILTROTATOR COUPLERS)
| Model Code Description Weight (lbs) |
| DX-BT-DYM14-TRQx1-BL-10
Ballast Tamper-DymaxRail Series 14-Tilt Rotator Coupler x 1 motor-Backhoe Loader-Class 10 STANDARD FEATURES: – 14.5 inch tine spacing – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – DymaxRail heavy duty vibrator group – Single cylinder; center mount – Integrated flow control for motor circuit – Machine adapter with pins for fitting tiltrotator coupler system setup on Bolt 202 plate – Transport stand with tie downs included WEIGHT: Tamper: 1500 lbs / Stand: 300 lbs / Total Weight: 1800 lbs |
| DX-BT-DYM14-TRQx1-BL-20
Ballast Tamper-DymaxRail Series 14-Tilt Rotator Coupler x 1 motor-Backhoe Loader-Class 20 STANDARD FEATURES: – 14.5 inch tine spacing – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – DymaxRail heavy duty vibrator group – Single cylinder; center mount – Flow control on motor circuit – Machine adapter with pins for fitting tiltrotator coupler system setup on Bolt 202 plate – Transport stand with tie downs included WEIGHT: Tamper: 1500 lbs / Stand: 300 lbs / Total Weight: 1800 lbs |
| DX-BT-DYM14-TRQx1-HX-16T
Ballast Tamper-DymaxRail Series 14-Tilt Rotator Coupler x 1 motor-Hydraulic Excavator-16 Ton STANDARD FEATURES: – 14.5 inch tine spacing – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – DymaxRail heavy duty vibrator group – Single cylinder; center mount – Integrated flow control for motor circuit – Machine adapter with pins for fitting tiltrotator coupler system setup on Bolt 303 plate – Transport stand with tie downs included WEIGHT: Tamper: 1700 lbs / Stand: 300 lbs / Total Weight: 2000 lbs |
| DX-BT-DYM14-TRQx1-HX-20T
Ballast Tamper-DymaxRail Series 14-Tilt Rotator Coupler x 1 motor-Hydraulic Excavator-20 Ton STANDARD FEATURES: – 14.5 inch tine spacing – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – DymaxRail heavy duty vibrator group – Single cylinder; center mount – Integrated flow control for motor circuit – Machine adapter with pins for fitting tiltrotator coupler system setup on Bolt 303 plate – Transport stand with tie downs included WEIGHT: Tamper: 1700 lbs / Stand: 300 lbs / Total Weight: 2000 lbs |
| DX-BT-DYM14-COLTRQX1-HX-12T
Ballast Tamper-DymaxRail Series 14-Colmar no rotation x 1 motor-Hydraulic Excavator-12 Ton STANDARD FEATURES: – 14.5 inch tine spacing – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – DymaxRail heavy duty vibrator group – Single cylinder; center mount with relief – Integrated flow control for motor circuit – Special machine adapter for COLMAR RR Excavators – Transport stand with tie downs included WEIGHT: Tamper: 1500 lbs / Stand: 300 lbs / Total Weight: 1800 lbs |
Design and specifications are subject to change without notice.
SINGLE TAMPER HYDRAULIC REQUIREMENTS
| MODELS: DX-BT-DYM14-270×1-GT-10 | DX-BT-DYM14-270×1-BL-10 | DX-BT-DYM14-270×1-BL-20 | DX-BT-DYM14-270×1-HX-8T |
| HYDRAULIC REQUIREMENTS:
Your machine will require the following (2x) circuits to operate the attachment. It also requires a drain line for the motor circuit. This attachment is provided with a 12v electro-hydraulic valve to power the rotation circuit. Installation of the cabling kit is required prior to use. If your machine does not have the correct number of hydraulic circuits or controls please contact your sales representative to discuss alternative solutions for setup of the attachment. CIRCUIT 1 – VIBRATE MOTOR Type: Uni-directional one-way + case drain line required. Case drain line size min -08 size (1/2 in hose) Flow GPM/PSI (min/max): 18-21 / 3,000 CIRCUIT 2 – TINE SQUEEZE ARMS Type: Bi-directional circuit for open close function Flow GPM/PSI (min/max): 10-15 / 3,000 CIRCUIT 3 – ROTATION Type: Electro-hydraulic 12v Requires installation of wire cable kit provided for operating solenoid on diverter valve. Valve mounted on tamper workhead. NOT SUPPLIED: Jumper hose lines from attachment bulkhead to machine lines with disconnects. |
| MODELS: DX-BT-DYM14-270×1-HX-12T | DX-BT-DYM14-270×1-HX-16T | DX-BT-DYM14-270×1-HX-20T |
| HYDRAULIC REQUIREMENTS:
Your machine will require the following (2x) circuits to operate the attachment. It also requires a drain line for the motor circuit. This attachment is provided with an electro-hydraulic 24v valve to power the rotation circuit. Installation of the cabling kit is required prior to use. If your machine does not have the correct number of hydraulic circuits or controls please contact your sales representative to discuss alternative solutions for setup of the attachment. CIRCUIT 1 – VIBRATE MOTOR Type: Uni-directional one-way + case drain line required. Case drain line size min -08 size (1/2 in hose) Flow GPM/PSI (min/max): 18-21 / 3,000 CIRCUIT 2 – TINE SQUEEZE ARMS Type: Bi-directional circuit for open close function Flow GPM/PSI (min/max): 10-15 / 3,000 CIRCUIT 3 – ROTATION Type: Electro-hydraulic 24v Requires installation of wire cable kit provided for operating solenoid on diverter valve. Valve mounted on tamper workhead. NOT SUPPLIED: Jumper hose lines from attachment bulkhead to machine lines with disconnects. |
| MODELS: DX-BT-DYM14-TRQx1-BL-10 | DX-BT-DYM14-TRQx1-BL-20 | DX-BT-DYM14-TRQx1-HX-16T | DX-BT-DYM14-TRQx1-HX-20T | DX-BT-DYM14-COLTRQX1-HX-12T |
| HYDRAULIC REQUIREMENTS:
Your machine will require the following (2x) circuits to operate the attachment. It also requires a drain line for the motor circuit. CIRCUIT 1 – VIBRATE MOTOR Type: Uni-directional one-way + case drain line required. Case drain line size min -08 size (1/2 in hose) Flow GPM/PSI (min/max): 18-21 / 3,000 CIRCUIT 2 – TINE SQUEEZE ARMS Type: Bi-directional circuit for open close function Flow GPM/PSI (min/max): 10-15 / 3,000 NOT SUPPLIED: Jumper hose lines from attachment bulkhead to machine lines with disconnects. |
OPTIONAL TWIN TAMPER CONFIGURATIONS
| Group No Model Description Weight |
| 8235D1
DX-BT-DYM14-270xTWIN-HX-20T Ballast Tamper-DymaxRail Series 14-270 deg rotation x Twin Workhead Beam Style Mount-Hydraulic Excavator-20 Ton STANDARD FEATURES: – (2x) Tamping workheads fastened to beam via bolted connection. Offered in narrow, standard, and broad gauge designs. Workhead spacing is factory-set to match each customer’s specified track gauge requirements for precise alignment and optimal tamping performance. – 270 degree rotation positioner – 14.5 inch tine spacing on workheads – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – Integrated lift stow-lock pin for each workhead – for tamping in switch and crossing applications. – 2x DymaxRail heavy duty vibrators – Integrated flow control for motor circuit – Machine adapter with pins mounted to Bolt 303 plate – 24v Electro hydraulic valve mounted on workhead provided with cable kit – Transport stand with tie downs included This attachment style is designed for hi-rail type machinery mounted directly over the railroad tracks. CONTACT DYMAXRAIL FOR HYDRAULIC REQUIREMENTS ASSOCIATED WITH TWIN TAMPERS Tamper Workhead weight (lbs) 5,200 Tamper stand (lbs) 300 |
| 8234D1
DX-BT-DYM14-TRQTWIN-HX-20_25T Ballast Tamper-DymaxRail Series 14-Tilt Rotator Coupler x Twin Workhead Beam Style Mount-Hydraulic Excavator-20 or 25 Ton STANDARD FEATURES: – (2x) Tamping workheads fastened to beam via bolted connection. Offered in narrow, standard, and broad gauge designs. Workhead spacing is factory-set to match each customer’s specified track gauge requirements for precise alignment and optimal tamping performance. – 14.5 inch tine spacing on workheads – 2 inch thick T1 tines with AR500 weld-on pads (DY150716) – Integrated lift stow-lock pin for each workhead for tamping in switch and crossing applications. – 2x DymaxRail heavy duty vibrators – Integrated flow control for motor circuit – Machine adapter with pins mounted to Bolt 303 plate – 24v Electro hydraulic valve mounted on workhead provided with cable kit – Transport stand with tie downs included This attachment style is designed for hi-rail type machinery mounted directly over the railroad tracks. This model does not include a built-in rotation positioner in the beam adapter for the workheads. CONTACT DYMAXRAIL FOR HYDRAULIC REQUIREMENTS ASSOCIATED WITH TWIN TAMPERS Tamper workhead weight (lbs) 4,500 Tamper stand (lbs) 300 |
Not the right fit for your operation? Find the tamper that is. View all DymaxRail Ballast Tamper models →
