Runs on your standard auxiliary circuit — No high-flow hydraulics.
The DymaxRail Tiltrotator Quick Coupler is engineered to give operators superior flexibility by combining hydraulic tilt, full 360° rotation, and quick attachment swaps. Designed for CAT A, B, and CB linkage machines, this coupler fits directly to the factory stick using the OEM pin spacing and auxiliary hydraulics.
Applications
- Railway maintenance and construction
- Utility, infrastructure, and rights-of-way applications
- Rental fleets needing simplified operations
KEY FEATURES
- Rotate 360° and tilt up to 40° each way for maximum maneuverability.
- Switch attachments with a manual cam lock coupler.
- Heavy-duty trunnion-mounted tilt cylinders with integrated load hold valves.
- Integrated diverter valve requires just one low flow, medium pressure circuit for operation.
- Runs hydraulic attachments through a 5-line pass-through; 30T handles non-hydraulic tools.
- Rugged design with upgraded flow paths and reduced backpressure.
SPECIFICATIONS
FOR CAT 313-315 A LINKAGE
| MODEL: DX-QC-PGM-360T80AL-HX-15T
DESCRIPTION: Quick Coupler-Pin Grab Manual-360 degrees rotation + Tilt 80 degrees for Cat A Linkage-Hydraulic Excavator-15 Ton WEIGHT: 1,355 lbs |
| COMPATIBILITY:
– Will fit Cat 313-315 A linkage machinery |
| STANDARD FEATURES:
– RB120 Rotary box group with 5 oil lines passing through (standard box) |
| HYDRAULIC REQUIREMENTS: The excavator will require the following circuits for operation. All of the circuits are two-way valve controls.
Circuit 1 – Rotator Circuit 2 – Tilt (Electro-controlled) Best to setup on dedicated functions on machine with proportional controls for smooth operation. The max limits for oil range and pressures are listed above. Contact Dymax for information. |
Design and specifications are subject to change without notice.
FOR CAT 320-325 B LINKAGE
| MODEL: DX-QC-PGM-360T80BL-HX-20T
DESCRIPTION: Quick Coupler-Pin Grab Manual-360 degrees rotation + Tilt 80 degrees for Cat B Linkage-Hydraulic Excavator-20 Ton WEIGHT: 2,200 lbs |
| COMPATIBILITY:
– Will fit Cat 320-323-324-325 B linkage machinery – Lower coupler picks up B linkage attachments |
| STANDARD FEATURES:
– RB200 rotary box group with 5 oil lines pass through (standard box) – Twin cylinder rotation system with trunnion mounts, hardlined – Manual pin grab coupler for B linkage Cat attachments – Includes set of pins for top machine connection (B linkage) |
| HYDRAULIC REQUIREMENTS: The excavator will require the following circuits for operation.
ROTATOR: 8-10 GPM max @ 3000 psi – Valve Type: Two-way flow for both directions of rotation. – Works from standard auxiliary circuit on Caterpillar B linkage excavator. TILT: 8-10 GPM max @ 3000 psi – Valve Type: Electro-hydraulic 24V valve with wiring kit provided. – Requires installation of the wiring kit to power the tilting function. Questions? Please contact DymaxRail sales. |
Design and specifications are subject to change without notice.
FOR CAT 325-330 CB LINKAGE
| MODEL: DX-QC-PGM-360T80CBL-HX-30T
DESCRIPTION: Quick Coupler-Pin Grab Manual-360 degrees rotation + Tilt 80 degrees for Cat CB Linkage-Hydraulic Excavator-30 ton WEIGHT: 2,300 lbs |
| COMPATIBILITY:
– Will fit Cat 325 and 330 CB linkage machinery – Lower coupler picks up CB linkage attachments |
| STANDARD FEATURES:
– RB270 rotary box group (DY167250) – Twin cylinder tilt system with trunnion mounts, hardlined up to 80 degrees total – Manual pin grab coupler for CB linkage Cat attachments – Includes set of pins for top machine connection (CB linkage) NOTE: There is no oil feed-through with this design. Suited for non-hydraulic attachments, blades, buckets, forks, etc. |
| HYDRAULIC REQUIREMENTS: The excavator will require the following circuits for operation.
ROTATOR: 8-10 GPM max @ 3000 psi – Valve Type: Two-way flow for both directions of rotation. – Works from standard auxiliary circuit on Caterpillar B linkage excavator. TILT: 8-10 GPM max @ 3000 psi – Valve Type: Two-way flow for both directions of rotation. – Works from standard auxiliary circuit on Caterpillar B linkage excavator. Questions? Please contact DymaxRail sales. |
Design and specifications are subject to change without notice.
GALLERY
FAQ
DO YOU NEED HIGH-FLOW HYDRAULICS TO RUN A TILTROTATOR ON A CAT EXCAVATOR?
| No. This coupler runs rotation off the machine’s standard auxiliary circuit at 8–10 GPM, 3,000 psi. On the 15- and 20-ton models, the tilt is 24V electric, so you’re not adding a second hydraulic circuit or a high-flow package. |
WHAT SIZE EXCAVATOR DO YOU NEED FOR A TILT-ROTATE COUPLER?
| The DymaxRail tilt-rotate coupler will fit Cat 313 through 315 A linkage machinery, Cat 320 through 325 B linkage machinery, and Cat 325 through 330 CB linkage machinery. |
CAN I RUN HYDRAULIC ATTACHMENTS THROUGH IT?
| The 15- and 20-ton models have a 5-line oil pass-through for hydraulic tools. The 30-ton is built for non-hydraulic attachments such as blades, buckets, and forks. |
HOW DO ATTACHMENTS LOCK ON?
| A manual cam-lock pin grab (65 mm pins on A linkage). There are no electronics in the lock to fail or recalibrate, fewer wear points than a hydraulic auto-coupler, and it’s serviceable in the field. |
HOW FAR DOES IT TILT AND ROTATE?
| 360° continuous rotation and 80° of tilt, 40° each direction. |



